Home > Customization options > For backlight & transmission illumination applications
Photosensitive ink developed on float glass
Description: Accuracy +/-10um, maximum size 2000x1500mm

1. Customization MOQ is 1pcs.

2. Dot Vision directly serves and supports international customers.

3. You can get in touch with our engineers quickly by clicking below Buttom "Inquiry now" "Ask Questions" "Customization"

Custom Photosensitive ink developed on float glass test&calibration targets: For backlight / transmission illumination applications
Accuracy (um)+/- 10um
Smallest line width/ Minimum feature size (mm)1.0mm
Maximum dimension (mm)2000 x 1500mm
Tolerance of outer dimension+/- 0.1mm
Height of pattern coating (um)20umThickness(mm)0.5-10mm optional
Manfuacturing processPhotosensitive ink developing3rd party certificationOn Request
DisadvantageIf +/-1um accuracy is essential, high resolution printing is not an option for consideringAdvantageCompared with chrome choice, if +/-10 accuracy is satisfying, high resolution printing on glass is a compromise choice both in accuracy and cost aspects
Chemically and dimensionally stable, and reasonably hard
If you don't have pattern design, Dot Vision engineer could help you design the pattern/drawing
Holes/ Angles/ Corners/ Protective Chamfers on the calibration&test targets are on requestcustomization.jpg
Irregular shapes are on requestirregular shape customization calibration target.jpg
Opaque option for printing on glass2.jpg

Properties of soda lime float glass (float glass)
Thermal Properties

Thermal Expansion Coeff (15 to 200 )

100X10-7 / 

Annealing Point




Refractive Index

1.50-1.70 Nd






Specific Gravity

2.5 g/cm3

Knoop Hardness

500 kg/mm2

Shear Modulus

3000 kg/mm2

With guaranteed product quality, all calibration targets are tested using precision measurement instruments before packing and delivery to clients to ensure the accuracy.


Test report of a Dot Vision calibration target using a GOM 3D inspection system

Dot Vision can provide third party certificate of the accury from feature to feature for the customization product if you require. You can name and require  any feature/position which you want accuracy certification from third party.

Holes/ angles/ corners on the calibration target are available

5.jpg  16.jpg  37.jpg

Irregular shapes of calibration target are available

20.jpg  22.jpg  26.jpg

28.jpg  29.jpg  35.jpg

3.jpg  5.jpg  16.jpg

9.jpg  10.jpg  11.jpg

18.jpg  35.jpg  43.jpg

20.jpg  22.jpg  28.jpg

26.jpg  29.jpg  30.jpg

33.jpg  38.jpg  40.jpg

  • How about customization?

    We are always happy and patient to hear your own ideas about the design of a customised calibration target, MOQ is 1pcs.

  • How can I make payment?

    Paypal, credit card, or bank transfer are all available. 

  • How does Dot Vision make delivery to you?

    Dot Vision use DHL/Fedex/TNT/UPS to make the delivery to international customers from worldwide, no matter you are from Asia, America, or Europe. Normally you can receive package within 3 days, fastest service is in 2 days.

  • Where does Dot Vision serve and support?

    Dot Vision directly serves and supports international customers from worldwide, Asia, America, Europe.

  • Is there initial setup cost for customization?

    Dot Vision makes any customization pattern without extra initial setup cost, besides, Dot Vision offers to design the drawing for you without charge which is within our service.

  • How can I get in touch with Dot Vision immediately?

    You can get in contact with us quickly from the yellow buttoms "Inquiry Now", "Ask Question", "Customization", you can also send us an e-mail via info@dot-vision.com, our engineer will get back to you immediately within 24 hours.

  • How to get customization/ what's the customization procedure?

    1. Selecting the suitable substrate material is the first but also important step in customization, you can refer to this webpage  Select right substrate material to select suitable material, or you are always welcome to discuss with us to select suitable material via  info@dot-vision.com, Dot Vision engineer will come back to you immediately within 24 hours; 

    2. After selecting material, you can send us your drawing via  info@dot-vision.com(PDF, .dwg, .dxf, .jpg files are all fine), Dot Vision engineer will come back to you immediately within 24 hours; 

    if you don't have drawing, Dot Vision engineer could help to design the drawing;

    3. Dot Vision engineering team will make you quotation based on the material and your drawing; 

    4. After order entry, Dot Vision engineers will send you final manufacturing drawing for double confirmation before final manufacturing; 

    5. Customization manufacturing time is within 7 working days after final manufacturing drawing is confirmed;